How To Cut a Tree On The Ground With a Chainsaw – Full Guide 2023

Do you want to master the art of cutting trees down with your chainsaw, but don’t know how? Then you’ve come to the right place!

Cutting trees can seem like an intimidating task due to their size and complexity, but it doesn’t have to be.

We’ll teach you all that you need to know about how to chop down a tree on the ground with a chainsaw in no time at all.

Through careful planning, preparation, and following the correct safety measures, anyone can successfully take down their tree.

So keep reading if you are interested in learning about “How to Cut a Tree on the Ground with a Chainsaw

Wear protective gear

Don’t forget to wear protective gear when cutting your tree

The process of cutting a tree with a chainsaw on the ground involves the following steps.

  • Step 1: Identify and clear out the felling area for the trees
  • Step 2: Analyze the tree thoroughly and plan your cuts
  • Step 3: Estimate the reach
  • Step 4: Make a notch cut on the side of the tree facing the direction you want it to fall
  • Step 5: Make a back cut on the opposite side of the notch cut
  • Step 6: Use a wedge
  • Step 7: Limb and buck the tree into smaller pieces

Tools / Equipment Needed

Wear protective gear - How to cut a tree on the ground with a chainsaw

Earmuffs: Wearing appropriate ear protection such as earmuffs, is a must when operating any kind of machinery to protect your hearing.

Chaps: Investing in a quality pair of chaps is another essential for protecting against potential hazards. They are made from flame-retardant material so that they can protect the wearer from chainsaw blades and flying debris. 

Gloves: It’s important to wear protective gloves when using any kind of power tool, especially chainsaws.

Goggles: Eye protection is also essential when operating a chainsaw. Goggles provide a barrier between your eyes and flying debris that can be kicked up by the saw’s blade. 

Helmet: Best chainsaw helmets with a face shield are an additional level of protection that helps protect against head injuries caused by branches or falling objects while working in trees or other elevated areas. 

Chainsaw: When it comes to choosing a chainsaw, consider buying saws that are reliable, durable, and built with safety in mind. Some of the brands you can purchase are Echo and Husqvarna.

Wedge: A wedge is used to split wood along its grain after it has been cut by the chainsaw blade; this helps break apart large logs into smaller pieces for easier handling or hauling away.

Wear protective gear

When cutting down a tree, you must always think of safety first. Make sure to wear protective gear, such as protective glasses, boots, ear protection, and gloves.

Ensure that your chainsaw is in proper working condition and that you know how to use it properly. Be aware of other people

When it comes to cutting down trees, safety is of the utmost importance. Before you start any chainsaw work, make sure you are wearing proper protective gear such as eye protection goggles, chaps, and gloves.

Step1: Identify and clear out the felling area for the trees

When felling trees, it is important to identify and clear the surrounding area of any potential hazards before commencing work.

This includes identifying and removing electric wires, vines, and other obstacles that can interfere with the tree’s falling motion when cut.

Additionally, it is important to create a wide enough area around the tree so that workers have ample space to safely move away from it when it falls. 

Step 2: Identify hazards.

It is also recommended that the falling area be inspected before cutting, to identify any additional hazards or obstructions that could interfere with the tree’s fall.

The inspection should include checking for electrical wires and foliage that can impede the descent of the tree or cause it to veer off course unexpectedly.

By taking these safety precautions, workers can ensure a safe and successful felling operation that minimizes risk for all involved.

Step 3: Analyze the tree thoroughly and plan your cuts

Analyzing the tree thoroughly and planning your cuts are essential for a successful felling. You should observe the overall condition of the tree, looking for signs of decay or dead branches that could become loose during cutting.

Additionally, check for lean-forward, lean-back, or lean-side to ensure that your tree won’t fall in an unexpected direction.

Make sure to also inspect the branch structure and any other potential hazards before beginning work.

By taking these precautions and analyzing the tree thoroughly, you can make informed decisions regarding your cuts and increase your chances of success when falling.

Step 4: Estimate the reach

It is necessary to figure out how far the tree will fall when it falls. This will help you determine how much space you need to clear in order to create an escape route.

Measure twice and cut once if necessary – this extra precaution will save you time and energy in the long run!

A convenient way to estimate how far a tree will reach is by using the “axe handle” method.

This involves standing back from the tree at arms-length with one eye closed and holding an axe handle vertically in front of you until its top lines up with the treetop and its bottom with the base.

This provides an accurate visual measure of how far away from the trunk to expect it to fall. Keep an extra margin of error, however.

Step 5: Make a notch cut on the side of the tree

Notching tree- How to cut a tree on the ground with a chainsaw

Making a notch cut on the side of the tree facing the direction you want it to fall is essential when felling trees.

This is because you need to create an angled surface or “notch” that will guide the tree in a predetermined direction when it falls.

To make this notch cut, you should first determine one-fifth of the total tree diameter and use that as your reference point.

Next, make the notch cut from the top and the bottom at 60-degree and 30-degree angles respectively. 

Step 6: Make A Back Cut On The Opposite Side

After completing your notch cut, make another back cut on the opposite side – but do not cut further than halfway through! This will reduce stress from friction which can cause splitting or tearing when the weight of gravity takes over.

To avoid having this happen mid-cut, use a wedge (or two) between both cuts to keep them apart until finished – then remove before standing back for final felling! 

Step 7: Limb and buck the tree into smaller pieces

Finally, once your tree has been successfully felled, limb and buck it into smaller pieces for easier transportation or disposal.

Keep in mind that some trees may contain additional dangers such as disease or harmful insects so be sure to wear gloves when handling them too!

Clean The Surroundings

Clean up all debris and dispose of it properly according to local regulations and standards. 

By following these steps correctly with safety in mind, anyone can have confidence in their ability to safely cut down a tree using a chainsaw!

How to cut a tree on the ground with a chainsaw: FAQs

How to Cut A Small Tree With A Chainsaw?

Cutting a small tree with a chainsaw requires the same basic steps as cutting up a large tree.

Start by preparing the area and wearing all necessary safety gear, such as eye protection, gloves, and chaps.

Now, create a notch cut from the top and the bottom at 60-degree and 30-degree angles respectively. 

Hammer a wedge (or two) between both cuts to keep them apart.

Cut the tree horizontally from the opposite side of the notch.

Final Thoughts

In conclusion, cutting a tree on the ground with a chainsaw can be safely and successfully accomplished by following the right steps.

With proper planning, preparation, and safety measures in place, you can confidently take down your tree with ease.

The most important steps you need to follow are having an escape plan, wearing protective gear, making sure your saw is sharp and in proper working order, felling the tree in stages, cutting the wedges, and finally making sure all limbs are properly placed. Following these steps will help ensure that you cut your tree safely. Goodluck!

Photo of author

Charlie Bass

Charlie has been a mechanic for over 25 years and has worked on everything from small engine gardening equipment to huge diesel-electric mining haul trucks, trains and even aircraft. This broad range of industry experience gives him a unique insight into almost anything mechanical especially with an engine, including gardening and landscaping equipment. He currently owns his own mobile mechanic business and lives with his family in Australia.

Leave a Comment